※本スマートフォンサイトは縦表示に最適化しております。
RGB Color Sensor
CPS333AT is a color sensor molded into a chip on board package having a 3-channel (RGB) photodiode sensitive to the Red, Green and Blue regions of the spectrum. By adoption of small and thin package (3.5mm x 3.0mm x 0.7mm), it is the best for small module.
| Package | 3.5mm×3.0mm×0.7mm COB-12pin GOC(Glass On Chip) package |
|---|---|
| Photosensitive area | 1.39mm×1.39mm (105μm×105μm - 12×12ARRAY) |
| Infrared light measures | Built-in infra-red cut filter |
| Output | RGB 3ch Analog current output |
| Solder reflow | compatible |
| Halogen free | compatible |
| Pb free | RoHS compatible |
| Others | High sensitivity 3channel(RGB) photodiode |
* Color detection.* Light quantity detection* Color temperature adjustment
Under development (Engineering sample supply is possible)
RGB Color Sensor
CPS289AT is RGB color sensor with three photo-diodes, Red (R), Green (G), and Blue (B).CPS289AT is the RGB color sensor which contained the Gain control function.( independent of each R, G, and B channel ) This sensor can convert RGB light into an Analog voltage. By adoption of small and thin package (3.5mm x 3.0mm x 0.7mm), it is the best for small module.
| Package | 3.5mm×3mm×0.7mm COB-12pin GOC(Glass On Chip) package |
|---|---|
| Photo detector size | 1.39mm×1.39mm (105μm×105μm - 12×12ARRAY) |
| Gain change function built-in | Four-step Gain adjustment |
| Infrared light measures | Built-in infra-red cut filter |
| Output | RGB 3ch Analog voltage output |
| Solder reflow | compatible |
| Halogen free | compatible |
| Pb free | RoHS compatible |
* Color detection. * Light quantity detection * Color temperature adjustment
Under mass production
I2C compatible RGB Color Sensor
CPS298AL is a color sensor that supports I2C interface. The sensor has sensitivity at Red(λ=610nm), Green(λ=540nm),and Blue(λ=460nm) respectively,and outputs detection results in 16 bit digital values.
| Package | 2.4mm×2.0mm×0.95mm COB-8pin GOC(Glass On Chip) package |
|---|---|
| Interface | I2C |
| Sensitivity Adjustment | Adjustable sensitivity by setting of integral time (1 - 65535) |
| Infrared light measures | Built-in infra-red cut filter |
| Output | Support I2C interface |
| Solder reflow | compatible |
| Halogen free | compatible |
| Pb free | RoHS compatible |
* Color detection * Light quantity detection * Color temperature adjustment
Under development (Engineering sample supply is possible)
