※本スマートフォンサイトは縦表示に最適化しております。
Ambient Light Sensor (Analog)
CPS295HT is an ambient light sensor of analog current output type that consists of a photodiode with spectral sensitivity characteristic approximate to luminosity factor, and a current amplifier circuit. The IC enables improvement in visibility of indications, improvement of life of light source, and also reduce power consumption by brightness control and ON/OFF control of light source such as displays.
| Package | 1.8mm×1.4mm×0.58mm TCOB-4pin Compact and thin COB package |
|---|---|
| Spectral Sensitivity | Spectral sensitivity near to luminosity factor |
| Light source dependency | Small output dependence of light source |
| Output | Current output proportional to the illumination of environment light @100lx 240uA |
| Solder reflow | compatible |
| Halogen free | compatible |
| Pb free | RoHS compatible |
* LCD-TV * NotePC/TabletPC * CarNavi/PND * Mobile Phone/Smart Phone
Under mass production
Ambient Light Sensor (Analog)
CPS295HW is an ambient light sensor of analog current output type that consists of a photodiode with spectral sensitivity characteristic
approximate to luminosity factor, and a current amplifier circuit.
The IC enables improvement in visibility of indications, improvement of
life of light source, and also reduce power consumption by brightness
control and ON/OFF control of light source such as displays.
Uses a high temperature resistant package and supports a wide operating temperature range (-40 ° C to 105 ° C)
| Package | 1.8mm×1.4mm×0.58mm TCOB-4pin Compact and thin COB package |
|---|---|
| Spectral Sensitivity | Spectral sensitivity near to luminosity factor |
| Light source dependency | Small output dependence of light source |
| Output | Current output proportional to the illumination of environment light @100lx 240uA |
| Solder reflow | compatible |
| Halogen free | compatible |
| Pb free | RoHS compatible |
* Auto Light
* Auto Antiglare Mirror
*HUD
Under mass production
Ambient Light Sensor (Digital)
CPS303AT is an ambient light sensor that has photo diode with spectral sensitivity near to luminosity factor,current amplifier circuit, and digital conversion circuit in single chip. CPS303AT outputs detection result in 16 bit digital value via I2C interface. CPS303AT enables to improve visibility of indication and life of light source, and reduce power consumption by brightness adjustment and on/off control of monitor displays etc.
| Package | 2.0mm×2.0mm×0.58mm TCOB-4pin Compact and thin TCOB package |
|---|---|
| Spectral Sensitivity | Spectral sensitivity near to luminosity factor |
| Light source dependency | Output characteristics proportional to illuminance of environmental light |
| Output | Small power dependance on light source Support I2C interface |
| Settings | Flexible setting of integration time and resolution setting |
| Function | Shutdown by software-sleep |
| Solder reflow | compatible |
| Halogen free | compatible |
| Pb free | RoHS compatible |
* LCD-TV
* NotePC/TabletPC
* CarNavi/PND
* Mobile Phone/Smart Phone
Under mass production
